　회사소개 | 찾아오시는길 | 회사약도

　묻고답하기 | 공지사항

66666666666

77777777777777777

left_menu

- Product information

- Technology

- Styles

Grinding spindles

HS, HSX
Tool interface: Internal cylindrical pilot with draw thread and face clamping;
Oil/air lubrication

HV-X
Tool interface: Internal cylindrical pilot with draw thread and face clamping;
Oil/air lubrication

For higher loads as well as partly higher power and higher torque in comparison to
corresponding types of the HSX style.

HV-XS
Tool interface: Internal cylindrical pilot with draw thread and face clamping;
Oil/air lubrication

Short spindle length and radial connector.

HS-T
Tool interface: Short taper; Oil/air lubrication

Grinding spindles, Milling spindles and Drilling spindles

HSP
Tool interface: HSK-C ..; Oil/air lubrication

HSP..g
Tool interface: HSK-C ..; Permanent grease lubrication

HV-P
Tool interface: HSK-C..; Oil/air lubrication

For higher loads as well as partly higher power and higher torque in comparison to
corresponding types of the HSP style.

HS, HSX

Tool interface: Internal cylindrical pilot with draw thread and face clamping;
Oil/air lubrication

Designation A	Tool interface d/W	Max. speed n_Max [rpm]	Power S6-60%		Max. frequency f_Max [Hz]	Current S6-60% I_S6 [A]
Designation A	Tool interface d/W	Max. speed n_Max [rpm]	P_S6 [kW]	at speed n [rpm]	Max. frequency f_Max [Hz]	Current S6-60% I_S6 [A]

HS 80c – 180000/0.4	D 04/08	180,000	0.4	180,000	3,000	2
HS 80c – 150000/0.5	D 04/08	150,000	0.5	150,000	2,500	2.5
HS 80c – 120000/1.1	D 06/12	120,000	1.1	120,000	2,000	6.5
HS 80c – 90000/2	D 08/14	90,000	2	90,000	1,500	6

HSX 80 – 120000/1.1	D 06/12	120,000	1.1	120,000	2,000	6

HSX 100 – 105000/2	D 08/14	105,000	2	105,000	1,750	6.5
HSX 100 – 90000/3	D 09/16	90,000	3	90,000	1,500	9
HSX 100 – 75000/5	D 10/18	75,000	5	75,000	1,250	13
HSX 100 – 60000/5	D 14/23	60,000	5	60,000	1,000	13

HSX 120 – 60000/7	D 14/23	60,000	7	60,000	1,000	18
HSX 120 – 51000/12	D 16/28	51,000	12	30,000	1,700	38
HSX 120 – 42000/12	D 22/38	42,000	12	30,000	1,400	38
HSX 120 – 30000/13	D 28/43	30,000	13	18,000	1,500	48

HSX 150 – 42000/16	D 22/38	42,000	16	27,000	1,400	58
HSX 150 – 42000/11	D 22/38	42,000	11	18,000	1,400	31
HSX 150 – 30000/23	D 32/53	30,000	23	18,000	1,000	63
HSX 150 – 30000/16	D 32/53	30,000	16	13,500	1,000	40
HSX 150 – 24000/23	D 36/63	24,000	23	18,000	800	63
HSX 150 – 24000/17	D 36/63	24,000	17	11,000	800	45
HSX 150 – 18000/17	D 36/63	18,000	17	11,000	600	45

HSX 170 – 30000/35	D 32/53	30,000	35	15,000	1,000	86
HSX 170 – 30000/21	D 32/53	30,000	21	9,000	1,000	53
HSX 170 – 24000/35	D 36/63	24,000	35	15,000	800	86
HSX 170 – 24000/21	D 36/63	24,000	21	9,000	800	53
HSX 170 – 18000/34	D 36/68	18,000	34	11,000	600	78
HSX 170 – 18000/23	D 36/68	18,000	23	7,500	600	58

A = Housing diameter [mm]
d = Diameter of cylindrical pilot [mm]
W = Diameter of clamping face [mm]

Data sheet of the HS/HSX style

HV-X

Tool interface: Internal cylindrical pilot with draw thread and face clamping;
Oil/air lubrication

For higher loads as well as partly higher power and higher torque in comparison to
corresponding types of the HSX style.

Designation 　 A	Tool interface d/W	Max. speed n_Max [rpm]	Power S6-60%		Max. frequency f_Max[Hz]	Current S6-60% I_S6 [A]
Designation 　 A	Tool interface d/W	Max. speed n_Max [rpm]	P_S6[kW]	at speed n [rpm]	Max. frequency f_Max[Hz]	Current S6-60% I_S6 [A]

HV-X 100 – 105000/2	D 09/16	105,000	2	105,000	1,750	6
HV-X 100 – 90000/3	D 10/18	90,000	3	90,000	1,500	9
HV-X 100 – 75000/5	D 14/23	75,000	5	75,000	1,250	13
HV-X 100 – 60000/9	D 16/28	60,000	9	51,000	2,000	28
HV-X 100 – 45000/9	D 22/38	45,000	9	30,000	1,500	28
HV-X 100 – 30000/9	D 28/43	30,000	9	21,000	1,000	30

HV-X 120 – 75000/7	D 14/23	75,000	7	75,000	1,250	24
HV-X 120 – 60000/13	D 16/28	60,000	13	30,000	2,000	37
HV-X 120 – 60000/12	D 16/28	60,000	12	51,000	1,000	29
HV-X 120 – 45000/18	D 28/43	45,000	18	30,000	1,500	51
HV-X 120 – 30000/18	D 32/53	30,000	18	24,000	1,000	51

HV-X 150 – 45000/36	D 28/43	45,000	36	30,000	1,500	95
HV-X 150 – 45000/25	D 28/43	45,000	25	21,000	1,500	67
HV-X 150 – 30000/37	D 36/63	30,000	37	21,000	1,000	92
HV-X 150 – 30000/26	D 36/63	30,000	26	15,000	1,000	67

A = Housing diameter [mm]
d = Diameter of cylindrical pilot [mm]
W = Diameter of clamping face [mm]

Data sheet of the HV-X style

HV-XS

Tool interface: Internal cylindrical pilot with draw thread and face clamping;
Oil/air lubrication

Short spindle length and radial connector.

Designation 　 A	Tool interface d/W	Max. speed n_Max [rpm]	Power S6-60%		Max. frequency f_Max[Hz]	Current S6-60% I_S6 [A]
Designation 　 A	Tool interface d/W	Max. speed n_Max [rpm]	P_S6 [kW]	at speed n [rpm]	Max. frequency f_Max[Hz]	Current S6-60% I_S6 [A]

HV-XS 120 – 60000/7.5	D 16/28	60,000	7.5	33,000	1,000	22
HV-XS 120 – 45000/7.5	D 28/43	45,000	7.5	18,000	1,500	28
HV-XS 120 – 30000/7.5	D 32/53	30,000	7.5	18,000	1,000	23

A = Housing diameter [mm]
d = Diameter of cylindrical pilot [mm]
W = Diameter of clamping face [mm]

Data sheet of the HV-XS style

HS-T

Tool interface: Short taper; Oil/air lubrication

Designation A	Tool interface d	Max. speed n_Max [rpm]	Power S6-60%		Max. frequency f_Max [Hz]	Current S6-60% I_S6 [A]
Designation A	Tool interface d	Max. speed n_Max [rpm]	P_S6 [kW]	at speed n [rpm]	Max. frequency f_Max [Hz]	Current S6-60% I_S6 [A]

HS-T 80 – 120000/1.1	T 7	120,000	1.1	120,000	2,000	6

HS-T 100 – 105000/2	T 7	105,000	2	105,000	1,750	6.5
HS-T 100 – 90000/3	T 9	90,000	3	90,000	1,500	9
HS-T 100 – 75000/5	T 12	75,000	5	75,000	1,250	13

A = Housing diameter [mm]
d = Largest taper diameter [mm]

Data sheet of the HS-T style

HSP

Tool interface: HSK-C ..; Oil/air lubrication

Designation A	Tool interface	Max. speed n_Max [rpm]	Power S6-60%		Max. frequency f_Max [Hz]	Current S6-60% I_S6 [A]
Designation A	Tool interface	Max. speed n_Max [rpm]	P_S6 [kW]	at speed n [rpm]	Max. frequency f_Max [Hz]	Current S6-60% I_S6 [A]

HSP 100 – 51000/5	HSK-C 25	51,000	6	36,000	1,700	18
HSP 100 – 51000/3	HSK-C 25	51,000	4	24,000	1,700	12
HSP 100 – 42000/5	HSK-C 32	42,000	6	36,000	1,400	18
HSP 100 – 42000/3	HSK-C 32	42,000	4	24,000	1,400	12

HSP 120 – 51000/11	HSK-C 25	51,000	12	30,000	1,700	38
HSP 120 – 51000/6	HSK-C 25	51,000	7	18,000	1,700	20
HSP 120 – 42000/11	HSK-C 32	42,000	12	30,000	1,400	38
HSP 120 – 42000/6	HSK-C 32	42,000	7	18,000	1,400	20
HSP 120 – 30000/11	HSK-C 40	30,000	13	18,000	1,500	48
HSP 120 – 30000/9	HSK-C 40	30,000	13	18,000	1,500	48

HSP 150 – 42000/14	HSK-C 32	42,000	16	27,000	1,400	58
HSP 150 – 42000/9	HSK-C 32	42,000	11	18,000	1,400	36
HSP 150 – 30000/18	HSK-C 50	30,000	23	18,000	1,000	63
HSP 150 – 30000/9	HSK-C 50	30,000	14	11,000	1,000	38
HSP 150 – 24000/18	HSK-C 63	24,000	23	18,000	800	63
HSP 150 – 24000/14	HSK-C 63	24,000	17	11,000	800	45

HSP 170 – 30000/32	HSK-C 50	30,000	35	15,000	1,000	86
HSP 170 – 30000/19	HSK-C 50	30,000	21	9,000	1,000	53
HSP 170 – 24000/32	HSK-C 63	24,000	35	15,000	800	86
HSP 170 – 24000/19	HSK-C 63	24,000	21	9,500	800	53
HSP 170 – 18000/29	HSK-C 63	18,000	34	11,000	600	78
HSP 170 – 18000/20	HSK-C 63	18,000	23	7,500	600	58

HSP 230 – 18000/45	HSK-C 63	18,000	50	7.300	600	108
HSP 230 – 18000/18	HSK-C 63	18,000	20	2.900	600	64
HSP 230 – 15000/42	HSK-C 80	15,000	47	4.700	500	107
HSP 230 – 15000/25	HSK-C 80	15,000	28	2.800	500	77

HSP 300 – 12000/30	HSK-C 100	12,000	34	1,000	600	136

A = Housing diameter [mm]

Data sheet of the HSP style

HSP..g

Tool interface: HSK-C ..; Permanent grease lubrication

Designation A	Tool interface	Max. speed n_Max [rpm]	Power S6-60%		Max. frequency f_Max [Hz]	Current S6-60% I_S6 [A]
Designation A	Tool interface	Max. speed n_Max [rpm]	P_S6 [kW]	at speed n [rpm]	Max. frequency f_Max [Hz]	Current S6-60% I_S6 [A]

HSP 100g – 30000/3	HSK-C 25	30,000	4	24,000	1,000	12
HSP 100g – 27000/3	HSK-C 32	27,000	4	24,000	900	12
HSP 100g – 21000/3	HSK-C 40	21,000	4.5	15,000	700	12

HSP 120g – 30000/6	HSK-C 25	30,000	7	18,000	1,000	20
HSP 120g – 24000/6	HSK-C 32	24,000	7	18,000	800	20
HSP 120g – 21000/9	HSK-C 40	21,000	13	18,000	1,050	48

HSP 150g – 24000/9	HSK-C 32	24,000	11	18,000	800	36
HSP 150g – 18000/9	HSK-C 50	18,000	14	11,000	600	38
HSP 150g – 15000/14	HSK-C 63	15,000	17	11,000	500	45

HSP 170g – 18000/19	HSK-C 50	18,000	22	10,000	600	53
HSP 170g – 15000/19	HSK-C 63	15,000	22	10,000	500	53
HSP 170g – 12000/20	HSK-C 63	12,000	23	7,500	600	58

HSP 230g – 12000/18	HSK-C 63	12,000	20	2.900	400	64
HSP 230g – 10000/25	HSK-C 80	10,000	28	2.800	333	77

HSP 300g – 8000/30	HSK-C 100	8,000	34	1,000	400	136

A = Housing diameter [mm]

Data sheet of the HSP..g style

HV-P

Tool interface: HSK-C..; Permanent grease lubrication

For higher loads as well as partly higher power and higher torque in comparison to
corresponding types of the HSP style.

Designation A	Tool interface	Max. speed n_Max [rpm]	Power S6-60%		Max. frequency f_Max [Hz]	Current S6-60 I_S6 [A]
Designation A	Tool interface	Max. speed n_Max [rpm]	P_S6 [kW]	at speed n [rpm]	Max. frequency f_Max [Hz]	Current S6-60 I_S6 [A]

HV-P 100 – 60000/9	HSK-C 25	60,000	9	51,000	2,000	28
HV-P 100 – 45000/9	HSK-C 32	45,000	9	30,000	1,500	28
HV-P 100 – 30000/9	HSK-C 40	30,000	9	21,000	1,000	30

HV-P 120 – 60000/13	HSK-C 25	60,000	13	30,000	2,000	37
HV-P 120 – 60000/12	HSK-C 25	60,000	12	51,000	1,000	29
HV-P 120 – 45000/18	HSK-C 40	45,000	18	30,000	1,500	51
HV-P 120 – 30000/18	HSK-C 50	30,000	18	24,000	1,000	51

HV-P 150 – 45000/36	HSK-C 40	45,000	36	30,000	1,500	95
HV-P 150 – 45000/25	HSK-C 40	45,000	25	21,000	1,500	67
HV-P 150 – 30000/37	HSK-C 63	30,000	37	21,000	1,000	92
HV-P 150 – 30000/26	HSK-C 63	30,000	26	15,000	1,000	67

A = Housing diameter [mm]

Datasheet of the HV-P style